67
Breaker Box (BMP
®
21-PLUS only)
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
Breaker Box (BMP
®
21-PLUS only)
Breakers are usually arranged in two columns or along one row, depending on geographic
regions. The breaker positions are numbered left-to-right or top-to-bottom, depending on label
orientation. This numbering system is universal across various competing manufacturers of
breaker panels.
To create Breaker Box labels:
1. Press LABEL TYPE .
2. Navigate to Breaker Box, then press Enter .
3. In the Spacing: field, enter the width of a standard breaker.
4. In the # of Breakers: field, enter the number of breakers to be labeled. This produces one
continuous strip, vertically aligned for US breaker boxes, or horizontally aligned for EU
breaker boxes.
A “partition” is a separator line that prints between breakers on a label. Indicate if you want a
separator line to print.
5. In the Partition: field, use the left or right navigation keys to turn the partition on or off.
6. In the Rotation: field (not visible on the initial data fields screen), use the left or right
navigation keys to access the degree of rotation desired for the printed labels - landscape
(0
°) or protrait (90°).
7. When finished, press Enter .
Landscape - 0° rotation Portrait - 90° rotation
To Next Page
Loading...
