Page 192 of 479
5.10 Instrument
This will allow the user to configure the Instrument related parameters like Batch, Security mode.
After entering the Configuration menu, select Instrument then Press the Enter key to get into Instrument
configuration menu. It displays the Instrument related configuration menu to configure. Press directional
keys on the right hand side to select the menu column. After completing
Configuration, press soft key, then press soft key to return to main display. All
configurations will be saved automatically.
5.10.1 Name
This enables the User to define the name for the recorder with a maximum of 18 characters.
Select “Name”, then Press “Enter”, soft key, a keyboard with several keys will appear. Press “Shift” to
select special characters. Press “Caps” to select capital letters. Press soft key “OK” after entering a new
recorder name.
5.10.2 Language
There are 20 different languages available for the user to select for user interface. They are
English, Simplified Chinese, Traditional Chinese, Japanese, Korean, French, German, Italian, Polish,
Spanish, Portuguese, Brazil Portuguese, Russian, Thai, Czech, Danish, Dutch, Swedish, and Turkish &
Greek.
5.10.3 Security
This will allow the user to select the security mode as Normal or CFR-21. Once the CFR-21
mode is enabled the related menus will be showed for the user to configure.
5.10.3.1 Logout
The automatic log out time for the device to logout when there is no user interface on the device.
This option is available only for CFR-21.
To Next Page
Loading...
Need help?
General
