Page 273 of 479
6.2.3.6 Add a Device to the Existing Device
It is possible to add a device to the existing project and log the data. For adding the device to the
existing project follow the procedure as follows.
7. Open the project by using Open project option as explained above.
8. Go to Configuration by using Configuration data in the View menu or icon on the Tool
bar.
9. Click Add and configure the device information to add additional device to the project.
10. Now the real time configuration will update the tags with new device information.
11. Close the Real time Configuration Viewer to update the project with the new device.
To Next Page
Loading...
Need help?
General
