Page 183 of 479
Configure display page to display External channel in display pages
5.9.7 Example for Controller as External Channels
Paperless recorder connected with temperature controller with slave address 2 via RS485
communication. The communication parameters for the communication are as below.
❖ Baud Rate: 9600
❖ Parity: None
❖ Data Length: 8 Bit
❖ Stop Bit: 1
The below picture shows the system configuration.
The below table shows the parameters needs to be mapped and logged from temperature
controller to external channels of recorder.
To Next Page
Loading...
Need help?
General
