7850-Install-IG101 Installation Guide
Brocade
®
7850 Extension Switch Hardware Installation Guide
7. Screw, 8-32 x 5/16-in. Flathead Phillips (16)
8. Screw, 6-32 x 1/4-in. Panhead Phillips (8)
9. Screw, 10-32 x 5/8-in. Panhead Phillips (8)
10. Retainer Nut, 10-32 (8)
Ensure that the items listed and illustrated are included in the kit. Note that not all parts may be used with certain
installations depending on the device type.
CAUTION
Use the screws specified in the procedure. Using longer screws can damage the device.
Flush-Front Mounting
CAUTION
The device must be turned off and disconnected from the fabric during this procedure.
NOTE
The illustrations in the rack installation procedures are for reference only and may not show the device that you
are installing.
7850-Install-IG101
24
To Next Page
Loading...
