Broadcom Brocade 7850 - Introduction; Supported Hardware and Software; Notes, Cautions, and Danger Notices; Contacting Technical Support for Your Brocade Product

7850-Install-IG101 Installation Guide Brocade
®
7850 Extension Switch Hardware Installation Guide
Introduction
This guide contains installation procedures and safety requirements for installing your switch into a rack system or as a
stand-alone device.
Also provided are steps to initially configure the Brocade
®
7850 Extension Switch for operation, to verify and monitor
operation, to replace switch field-replaceable units (FRUs), and to install transceivers and cables. Complete technical
specifications for the switch are also included in this guide.
Supported Hardware and Software
The Brocade 7850 Extension Switch is introduced in the Fabric OS
®
9.2.0 software release. The following tables list the
power supplies, the fan assemblies, and the rack mount kits supported on this device.
Table 1: Power Supply and Fan Assemblies
Part Number Description Quantity
XBR-650WPSAC-R 650W (maximum), AC/DC power supply FRU with nonport-side intake airflow 2
XBR-FAN-40-R Fan assembly FRU with nonport-side intake airflow 6
Table 2: Rack Mount Kits
Part Number Description
XBR-R000294 Universal two-post mid-mount or flush-mount rack kit
XBR-R000296 Universal four-post fixed flush-mount rack kit
Notes, Cautions, and Danger Notices
Notes, cautions, and danger statements may be used in this document.
NOTE
A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related
information.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to
hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to
you. Safety labels are also attached directly to products to warn of these conditions or situations.
Contacting Technical Support for Your Brocade
®
Product
If you purchased Brocade
®
product support from a Broadcom
®
OEM or solution provider, contact your OEM or solution
provider for all your product support needs.
7850-Install-IG101
6