Broadcom Brocade 7850 - Verifying the Operation of the Power Supply Assemblies

7850-Install-IG101 Installation Guide Brocade
®
7850 Extension Switch Hardware Installation Guide
3. Locking Tab
Do not force the installation. If the power supply assembly does not slide in easily, ensure that it is correctly oriented
before continuing.
CAUTION
Carefully follow the mechanical guides on each side of the power supply slot and make sure that the power
supply is properly inserted in the guides. Never insert the power supply upside down.
3. Plug the power cord into the power supply assembly; power is provided to the device immediately.
4. Verify that the LED on the new power supply assembly displays a steady green light while the device is operating. If
the LED is not a steady green, ensure that the power supply is securely installed and seated properly.
5. Optional: Enter psshow to display the PSU status. The power supply assembly status can also be viewed using Web
Tools.
Verifying the Operation of the Power Supply Assemblies
You can use the following commands to verify that the power supply assemblies are operational:
•
errDump
•
fanShow
•
psShow
•
sensorShow
•
switchShow
•
tempShow
Refer to the Brocade Fabric OS Command Reference Manual for output examples and descriptions.
7850-Install-IG101
80