Broadcom Brocade 7850 - Verifying the Operation of the Fan Assemblies

7850-Install-IG101 Installation Guide Brocade
®
7850 Extension Switch Hardware Installation Guide
4. Gently push the fan assembly into the chassis until it is firmly seated.
5. Using the Phillips screwdriver, secure the fan assembly to the chassis by tightening the captive screw.
6. Verify that the LED on the new fan assembly displays a steady green light while the device is operating.
7. Optional: Enter fanshow to display the fan assembly status. The fan assembly status can also be viewed using Web
Tools.
Verifying the Operation of the Fan Assemblies
You can use the following commands to verify that the fan assemblies are operational:
•
errDump
•
fanShow
•
psShow
•
sensorShow
•
switchShow
•
tempShow
Refer to the Brocade Fabric OS Command Reference Manual for output examples and descriptions.
7850-Install-IG101
86