Broadcom Brocade 7850 - Recording Critical Information about the Power Supply Assembly; Removing a Power Supply Assembly

7850-Install-IG101 Installation Guide Brocade
®
7850 Extension Switch Hardware Installation Guide
Recording Critical Information about the Power Supply Assembly
You can use the following commands to record the power supply assembly configuration and operation information:
•
chassisshow
•
historyshow
•
psshow
•
sensorshow
•
tempshow
Refer to the Brocade Fabric OS Command Reference Manual for output examples and descriptions.
Removing a Power Supply Assembly
Perform the following steps to remove a faulty power supply assembly:
Figure 41: Removing a Power Supply Assembly
1. Device
2. Power Supply
7850-Install-IG101
78