7850-Install-IG101 Installation Guide
Brocade
®
7850 Extension Switch Hardware Installation Guide
Power Supply Assemblies
The power supply assembly units can be removed and replaced without special tools. The units are identical and fit into
either slot. The switch can continue to operate during the replacement.
NOTE
The power supply and fan assembly units are hot-swappable if they are replaced one at a time.
Figure 40: Power Supply
1. Power Supply
2. Locking Tab
3. Power Supply Handle
4. Power Supply Status LED
5. Power Cable Receptacle
Figure 40 shows the correct position to install and insert the power supply
The device supports a power supply with port-side air exhaust. This unit moves the air from the nonport side to the port
side of the device.
7850-Install-IG101
74
To Next Page
Loading...
