Broadcom Brocade 7850 - FCIP and Fibre Channel Routing Services Configuration; Verifying Correct Operation

7850-Install-IG101 Installation Guide Brocade
®
7850 Extension Switch Hardware Installation Guide
Perform the following steps to modify the domain ID:
a) Disable the switch by entering the switchDisable command.
b) Enter the configure command. The command prompts display sequentially; enter a new value or press Enter
to accept each default value.
c) Enter y after the Fabric param prompt.
Fabric param (yes, y, no, n): [no] y
d) Enter a unique domain ID (such as the domain ID used by the previous switch, if still available).
Domain: (1..239) [1] 3
e) Complete the remaining prompts or press Ctrl+D to accept the remaining settings without completing all the
prompts.
f) Re-enable the switch by entering the switchEnable command.
FCIP and Fibre Channel Routing Services Configuration
If you want to enable the FC ports as a standard E_Port or F_Port, use the portcfgpersistentenable command to
enable the ports.
If you are using the FC ports as EX_Ports, you must configure the Fibre Channel Routing Services feature prior to
enabling the ports.
Refer to the Brocade Fabric OS Administration Guide for detailed instructions on configuring the Fibre Channel router
ports and GbE ports on the switch.
Verifying Correct Operation
Perform the following steps to verify correct operation of the device:
1. Check the LEDs to verify that all components are functional.
2. Verify the correct operation of the device by entering the following commands from the workstation.
Command Description
errDump Displays any errors
fanShow Displays fan status and information
historyShow Displays the device history
psshow Displays power supply status and information
switchShow Displays switch status and information
tempShow Displays temperature status and information
The switchShow command provides the following information about the device and port status.
7850switch:admin> switchshow
switchName: E_LS1
switchType:
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 156
switchId: fffc9c
switchWwn: 10:00:d8:1f:cc:12:c0:cd
zoning: ON (fos6k)
7850-Install-IG101
53