Brocade MLXe Series Hardware Installation Guide 215
53-1003030-01
Replacing fan assemblies
6
FIGURE 124 Handle removal
4. Orient the upward deflector on the fan assembly faceplate so that the exhaust will flow upward
and the holes in the upward deflector align with the holes where the screws secure the handle
to the fan assembly faceplate. Refer to Figure 124 in step 4.
5. Place the handle over the upward deflector aligning the handle with the screw holes and
secure the handle to the upward deflector and fan assembly faceplate with the two screws.
Refer to Figure 125.
FIGURE 125 Upward deflector oriented correctly between the handle and fan assembly faceplate
To Next Page
Loading...
Need help?
General
