2-59
Confidential
îš„ Error code BA00
This error does not usually occur during normal use. The possible causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
An unidentified error occurred.
îš„ Error code BB00
A white level not within the standard was scanned when function code 55 was executed.
îš„ Error code BC00
Although operation was retried due to error AC00 that occurred while scanning the fax, white
or black correction data for the second side CIS was not within the correct range.
îš„ Error code BD00
A black level not within the standard was scanned when function code 55 was executed.
---
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
Scanner Error
-
Step Cause Remedy
1
First side CIS unit or second
side CIS unit failure
Replace the first side CIS unit or second side
CIS unit.
2 Main PCB failure Replace the main PCB ASSY.
Scan Unable BC
See Troubleshooting and routine maintenance chapter in User's Guide.
Step Cause Remedy
1
Incorrect correction data for
second side CIS
Execute function code 55.
2 Second side CIS unit failure Replace the second side CIS unit.
3 Main PCB failure Replace the main PCB ASSY.
Scanner Error
-
Step Cause Remedy
1
First side CIS unit or second
side CIS unit failure
Replace the first side CIS unit or second side
CIS unit.
2 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
Need help?
General
