2-13
Confidential
2.6 Life of Toner Cartridge and Drum Unit
îš„ Life of toner cartridge
<Method of detecting toner volume>
Toner volume is monitored by the toner sensor and by the number of rotations of the
developer roller. When the toner sensor detects that the toner has run out or when the
number of rotations of the developer roller reaches the limit, "Replace Toner" is displayed.
• Detection by toner sensor
The machine is equipped with a function to detect the remaining toner by checking the
level at which the toner in the cartridge obstructs light from the transmission light sensor.
• Detection by number of rotations of developer roller
The machine is equipped with a function to detect the limit of the number of rotations of the
developer roller before the roller becomes abraded and unusable.
<Relationship between printable pages of toner cartridge and remaining toner>
The table below shows the life of toner cartridges, assuming that the print pattern specified
by ISO/IEC 19752 is printed. (Point 2 in the figure above)
Memo:
• When the number of rotations of the developer roller reaches the limit, a message
prompting the user to replace the toner cartridge appears even if some toner
remains.
Toner cartridge Printable pages
Starter 2,000
Standard 3,000
High 8,000
Super high 12,000
Toner life
Full
Low
Empty
pages
Cartridge Life End
Toner EmptyToner Empty
Low-duty
High-duty
Normal-duty
(ISO/IEC19752)
To Next Page
Loading...
Need help?
General
