4-45
Creating print data
Double Printing
Performing the print cycle two times separately will make the printed color stand out more.
Setup value Description
[0] No separate processes
[1] Separate processes (wait time between the 1st and 2nd print cycle)
[2] Separate processes (longer wait time than the case with setting [1] between the 1st and
2nd print cycle)
[3] Separate processes (longer wait time than the case with setting [2] between the 1st and
2nd print cycle)
<TIPS>
For the options [1] to [3], the platen will reciprocate two times.
The higher the setpoint is, the longer the print time will be.
To Next Page
Loading...
