Brother GTX600NB - Setup of Auto Screen Erase Time; Setting the Menu Timeout Period

7-4
What to do when needed
7-3. Setup of Auto Screen Erase Time
(1)
From the menu, select [Printer Setting] > [Auto Screen Erase Time], and press
.
(2)
Select your desired time until the liquid crystal panel and print button become unlit, and press
.
<TIPS>
 During this menu selection process, the currently selected set value is displayed.
7-4. Setting the menu timeout period
(1)
From the menu, select [Printer Setting] > [Menu TimeOut Setting], and press
.
(2)
Select the time before the display screen returns to the standby mode screen, and press
.
<TIPS>
 During this menu selection process, the currently selected set value is displayed.
Menu TimeOut Settin
g
1 min
3 min
5 min
OK
A
uto Screen Erase Time
No Auto Screen Erase
5 min
10 min
15 min
30 min
OK