Brother GTX600NB - What to Do When Needed

7-1
7
What to do when needed
Chapter7
As required, make settings and adjustments as mentioned below.
About menu layer on the setting screen
Menu Setting screen Description
[Printer Setting]
[Print Direction]
[Auto]
[Always Bi-Directional]
[Always Uni-Directional]
[Back Light]
[Light High]
[Light Medium]
[Light Low]
[Auto Screen Erase Time]
[No Auto Screen Erase]
[5 min]
[10 min]
[15 min]
[30 min]
[Menu TimeOut Setting]
[1min]
[3min]
[5 min]
[Speaker Volume] 0 to 7
[Temperature]
[Fahrenheit]
[Centigrade]
[Preview display settings]
[Display it upward]
[Display it downward]
[File name display setting]
[Priority to file name display]
[Priority to job name display]
[Platen Setting]
[Height settings by user]
[Obstcl sensr settng during print]
[Platen too low sensor]
[Low Temperature Mode]
[Enable(Normal)]
[Disable]
[Low Humidity Mode]
[Printing at Low Humidity]
[No Printing at Low Humidity]
[Select Everyday]
[Post-circulation Auto Cleaning]
[Before Next Printing]
[Soon after if within 30 min.]
[Soon after if within 1 hr.]
[Soon after if within 90 min.]
[Auto Cleaning Setting] 1 to 72
[Auto Cleaning Start Timing]
[Conduct before Printing]
[Conduct after Printing]
[Auto Multiple Pass Setting]
[Always ON]
[White Ink 6 cc or More]
[White Ink 16 cc or More (Standard)]
[White Ink 26 cc or More]
[Always OFF]
[Flushing Interval Setting]
[normal 42 lines]
[every 22 lines]
[every 6 lines]
[Flushing Volume Setting]
[More]
[Standard]