4-4
Creating print data
4-3. Using other applications
4-3-1. When using CorelDRAW
First of all, perform the following procedures:
Color setting
Print size
As required, perform the following procedures:
Create print data (ARX6 file).
Use the color palette in Useful Tools.
Convert data to bitmap image data.
Replace RGB=255 in bitmap image data with RGB=254.
<TIPS>
For this printer, it is recommendable to use CorelDRAW 2020/2021. The display screen is described assuming CorelDRAW
2019.
Color management settings
(1) In the menu bar, select [Tools] > [Color Management].
(2) Establish the settings in [Color management settings] as follows:
[RGB Profile]: [sRGB IEC61966-2.1]
[Primary color mode]: [RGB]
[Rendering intent]: [Relative colorimetric]
To Next Page
Loading...
