1-11
Before Using Your Printer for the First Time
1-4-3. Left side view/Rear side view
No. Name Function
1 Upper left side cover Open this cover when cleaning the internal area of the printer.
2 Lower left side cover Open the cover and replace the waste ink tank and waste water tank.
3 Waste ink tube This tube is used to direct the flow of waste ink down into the waste ink tank.
4 Waste ink tank This tank collects waste ink.
5 Drainage tube This tube is used to drain water.
6 Waste water tank This tank collects drain water.
7 Model plate On this plate, a product serial number is inscribed.
8 Power cord insertion port Insert the power cord into this port.
9 Power switch
Use this button to turn the power on/off to the printer.
To turn off the power, execute [Prepare Power OFF] on the operation panel, and
turn off the power switch after completing the operation.
10 LAN port Into this port, insert the LAN cable which is to be connected with a PC.
10 7 8 9
5
6
4
3
1
2
To Next Page
Loading...
