6-28
Precautions to keep good printing quality/use printer over the long term
6-1-10. Replacing the mist fan filter
When a warning message appears in the warning message window, replace the mist fan filter with a new one.
The inside of the main unit may become dirty with mist, which may cause a malfunction if you continue using the mist
fan filter without replacement.
(1) Prepare gloves and a new mist fan filter.
(2)
From the menu, select [Maintenance] > [Maintenance Part Clean/Replace] > [Clean nozzle guard and cap], and
press .
(3)
Select [Replace mist fan filter], and press .
<IMPORTANT>
If any other error or message is displayed on the operation panel or warning message window, follow the message to solve
the problem, then perform the cleaning.
<TIPS>
Pressing causes the platen to start moving. Do not put anything around the platen.
(4) Push in and open the mist fan door.
<NOTE>
For a proper work operation, be sure to wear the printer-provided gloves.
Replace mist fan filter
! WARNING
To Next Page
Loading...
