To Next Page

To Previous Page

1-19

Before Using Your Printer for the First Time

1-5. About the humidifier

The humidifier works to maintain the image quality and keeps the humidity of the unit properly.

Furthermore, the water accumulated inside the humidifier will be regularly discarded for hygiene control.

 If the humidity inside the printer is low, the amount of ink consumed will increase to maintain the functionality of the printer.

 If excessive water is supplied to the humidifier, the water will be released through the hose on the lower right front side of the

printer. Do not connect power cords on the floor near the printer. Doing so may result in electric shock.

<TIPS>

 The humidifier will not operate if the ambient humidity is high and the humidity inside the unit is sufficiently high.

1-5-1. About the water used

Use pure water.

 If non-pure water, such as tap water, is used, white powdery impurities will adhere to the inside of the unit, causing damage to the

printer and heads.

1-5-2. Water supply

Select the water supply to the printer from the following two methods.

Please refer to the Setup Manual for how to connect to the printer.

Optional items

 Water tank supply ASSY

 Water T6040 15M

 L-shaped fitting 06-06

Commercially available item

 Regulator

 Pure water equipment

Supply from a water pipe

<NOTE>

 If supplying water from a water pipe, perform piping according to the applicable laws and regulations.

 If necessary, use a regulator so that the supply pressure will be 0.2 MPa or less.

Pure water

equipment

Printer

Water

pipe

Brother GTX600NB User Manual

Other manuals for Brother GTX600NB