3-23
Installation and preparation
3-6. Adjustment
Adjust the printer using "GTX-6 Maintenance".
Menu name Description Things to prepare
See the operating procedure
with GTX-6 Maintenance
[Initial settings after
head replacement]
Make settings after print head
replacement.
―
"3-6-1. Initial settings after
head replacement >>P.3-24"
[Color adjustments
between the two color
heads]
Make adjustments after
replacing the print head if the
horizontal stripes (banding) in
the picture are noticeable.
White paper
"3-6-2. Color adjustments
between the two color heads
>>P.3-25"
[Firing Adjustment]
Make adjustments after print
head replacement if the print is
blurred and the printed result
appears too granular.
Black paper or
transparent sheet (such
as OHP sheet)
White paper
"3-6-3. Firing adjustment
>>P.3-26"
[2 same color heads
position adjustment]
Make adjustments if
misalignment occurs in
white-only or color-only printing.
Black paper or
transparent sheet (such
as OHP sheet)
White paper
"3-6-4. 2 same color heads
position adjustment >>P.3-27"
[Platen-rolling
adjustment]
Make adjustments if the
horizontal stripes (banding) in
the picture are noticeable after
printing.
White paper
"3-6-5. Platen-rolling
adjustment >>P.3-28"
[White/Color Alignment]
Make adjustments if the white
and color images are out of
position.
Black paper or
pretreated black or dark
color T-shirt
"3-6-6. White/color alignment
>>P.3-29"
[Setting of the time
displayed on the nozzle
check pattern]
No settings are required if
scheduled time settings for white
ink circulation have been made.
―
"3-6-7. Setting of the time
displayed on the nozzle
check pattern >>P.3-30"
[Set the scheduled time
for white ink circulation]
Make settings when making a
time reservation for white ink
circulation or canceling the
reservation.
―
"3-6-8. Set the scheduled
time for white ink circulation
>>P.3-32"
[Humidification
Schedule Settings]
Set the start time and end time
for humidification.
―
"3-6-9. Humidification
Schedule Settings >>P.3-35"
To Next Page
Loading...
