6-19
Precautions to keep good printing quality/use printer over the long term
(6) Set the flushing foam in the maintenance unit.
<IMPORTANT>
After this assembly process is completed, make sure that no flushing foam extends off the outboard end portions of the
maintenance unit. If it sticks out of the end portions, it may interfere with any nozzles and may result in non-ejection of
ink-jet droplets.
(7) Close the upper left-hand-side cover and top cover.
<NOTE>
Dispose of any waste resulting from the replacement in accordance with applicable laws and ordinances.
<TIPS>
The head cleaning will be performed to prevent ink from drying up.
On the color sideOn the white side
To Next Page
Loading...
