Brother GTX600NB - Page 203

6-35
Precautions to keep good printing quality/use printer over the long term
(13) Connect the head board aligned with the positioning pins on the carriage board.
<IMPORTANT>
 After connecting, check that the head board is not tilted.
(14) Place the flat cable in the hook and clamp on the carriage.
<CAUTION>
 Ensure that the flat cable for head A does not overlap with that for head B.
 Extend the flat cable on the print head side toward the carriage board so that the flat cable will not bend.
 Fold the flat cable on the print head side.
(15) Close the carriage board cover.
<IMPORTANT>
 Make sure that the latch is securely closed.
 Ensure that the flat cables do not extend past the edge of the cover.
<CAUTION>
 Ensure that the flat cable for head A does not overlap with that for head B.
Positioning pin
Head board
Flat cable
Clam
p
Fold the flat cable
Hook
Latch