Brother GTX600NB - Page 215

6-47
Precautions to keep good printing quality/use printer over the long term
(5) Unlock the upper left-hand-side cover and top cover and clean the suction cap.
Unlock and open the right-hand-side cover and clean the nozzle guard.
Two types of clean sticks are provided. Use either the clean stick T or R depending on what you want to clean.
<TIPS>
 For the cleaning method, refer to the description mentioned below.
(6) After the cleaning is completed, close all the covers.
<NOTE>
 Dispose of any waste resulting from the cleaning in accordance with applicable laws and ordinances.
<TIPS>
 Then, the head cleaning will be performed to prevent any ink from drying up.
 Because the cleaning cup will be reused, rinse it in clean cleaning solution and store it in a safe place.
X101
3
On the white side
On the color side
Suction cap
Locations to be
cleaned with clean
stick
T
Locations to be
cleaned with clean
stick
R
The nozzle guard
surface and between the
nozzle guard and nozzle