6-54
Precautions to keep good printing quality/use printer over the long term
Cleaning the backside of the carriage
(1) Clean the area shown below on the backside of the carriage.
(2) Use the clean stick R or waste cloth to clean the area.
<CAUTION>
When cleaning the backside of the carriage with a waste cloth, make sure that the waste cloth will not touch the nozzle
surface. The nozzle may be damaged, resulting in non-ejection if the objects touch the nozzle or other parts.
<TIPS>
Clean the white side in the same way.
Cleaning location
Wipe off the adhered mist ink with a
waste cloth
Absorb ink droplets with the clean stick R
To Next Page
Loading...
