8-12
Troubleshooting
The cleaning solution is leaked from the cleaning solution tank
Probable Cause Remedy Reference
Is the main body of printer put
aslant?
Place the printer horizontally.
If the problem is still not remedied, please
contact your dealer.
"3-1. Installation of printer
>>P.3-2"
Takes longer print time than before
Probable Cause Remedy Reference
Is the ambient temperature
under 18°C (64.4°F)?
Adjust the room temperature to 18°C (64.4°F) or
more.
If it is difficult to adjust the room temperature, set
the operational configuration under low
temperature to [Disable].
"7-10. Print Operation Settings
Under Low Temperature
>>P.7-8"
Is your printing under a low
humidity environment?
Wait for the humidity inside the printer to reach
50% or higher.
-
To Next Page
Loading...
