Brother GTX600NB - Page 274

9-3
Error message
Error code Error message Description
Remedy
0123 [Machine Error]
A communication error has
occurred between the main
board and actuator board 3
while the printer is in
operation.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
0131 [Machine Error]
A communication error has
occurred in the hardware on
actuator board 1 while the
printer is in operation.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
0132 [Machine Error]
A communication error has
occurred in the hardware on
actuator board 2 while the
printer is in operation.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
0133 [Machine Error]
A communication error has
occurred in the hardware on
actuator board 3 while the
printer is in operation.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
0141 [Machine Error]
A communication error has
occurred between the main
board and panel board while
the printer is in operation.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
0142 [Machine Error]
A communication error has
occurred between the main
board and platen servomotor
while the printer is in
operation.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
0143 [Machine Error]
A communication error has
occurred between the main
board and carriage
servomotor while the printer
is in operation.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
0144 [Machine Error]
A communication error has
occurred between the main
board and white circulation
solenoid board while the
printer is in operation.
Check and see if any source produces a loud
noise near the printer.
If the problem persists even after reactivating
the printer, please contact your dealer.
1010 [Tank correction timing]
The main tank remaining
volume sensor needs to be
corrected.
Select [Correct tank volume sensor] menu item
and correct the ink tank remaining volume
sensor.
1011
[The tank needs
corrections
Execute correction]
The ink tank remaining
volume sensor needs to be
corrected.
Correct the ink tank remaining volume sensor
following the instructions on the screen.
1031
[Color Head Getting
Warm]
The temperature of color
head A is rising.
Please wait until the temperature decreases.
If the problem persists, please contact your
dealer.
1032
[Color Head Getting
Warm]
The temperature of color
head B is rising.
Please wait until the temperature decreases.
If the problem persists, please contact your
dealer.