Brother HL-1870N - Page 54

HL-1850/1870N SERVICE MANUAL
2-25
Operations for printing secure data
Press the Reprint switch.
When there is no reprint data in memory
If the printer does not have any data in buffer memory and you press the Reprint switch, the
LCD briefly shows 
NO DATA STORED
.
When you want to delete the job
Select the 
DELETE STORAGE
 menu under the SETUP menu of the control panel. Select
the user name and the job to delete (you need to input the password to delete secure data).
When you cancel the reprinting job
Pressing the Job Cancel switch allows you to cancel the reprint job. The Job Cancel switch
also allows you to cancel a paused reprint job.
Press + or -
Press Set
LAST JOB
SECURE
USER XXXXXXX
If there is no data.
NO DATA STORED
JOB XXXXXXX
PASSWORD XXXX
COPIES= 1
PRINTING
Press + or  to select the user name.
Press the Set switch to set the user name.
Press + or  to select the job.
Press the Set switch to set the job.
Input your password.
Press the Set switch to set the password.
Press the Set or Reprint switch.
If you press the Go switch, the display shows 
PRESS SET TO PRINT
.
The printer will exit this menu
after a timeout period.