2-76
Confidential
■ Error code D2
Error code D3
Error code D4
Error code D5
Error code D6
Error code D7
Error code D8
Error code D9
Error code DA
Error code DB
Error code DC
This error does not usually occur in the normal use. The conceivable causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
<User Check>
- Turn OFF the power switch, and turn it ON again after a while.
-
-
-
-
-
-
-
-
-
-
-
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
