2-68
Confidential
■ Error code A1
The front cover is open.
<User Check>
- Close the front cover properly.
Cover is Open
Close the Front Cover.
Step Cause Remedy
1 Harness connection failure of
front cover sensor
Check the harness connection of the
front cover sensor and reconnect it.
2 Front cover sensor failure Check the sensor performance following
the procedure described in “Function code
32”. If any problem occurs, replace the
front cover sensor.
3 The member part to press the
front cover sensor which is
located at the inner left side of
the front cover is broken.
Replace the front cover.
4 Engine PCB failure Replace the engine PCB ASSY.
5 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
