Brother HL-L3210CW - Unable to Perform 2-Sided Printing

2-86
Confidential
4.2.7 Unable to perform 2-sided printing
<User Check>
• Close the back cover completely.
• Close the T1 completely.
• Set the driver setting to 2-sided printing.
• Use A4 or Letter paper specified by the manufacturer.
Step Cause Remedy
1 Eject actuator coming off Reattach the eject actuator.
2 Back cover failure Replace the back cover.
3 Duplex clutch failure Replace the paper feed unit.
4 Duplex unit failure Replace the duplex unit.
5 Eject sensor failure Replace the eject sensor PCB.
6 Paper eject ASSY failure Replace the paper eject ASSY.
7 Main PCB failure Replace the main PCB.