5-56
Confidential
1.3.26 Display machine error code (Function code 82)
< Function >
This function is used to display the latest error code on the LCD.
< Operating Procedure >
(1) For models with touch panel
Press the [8], and then the [2] in the initial state of maintenance mode. “MACHINE ERR
XXXX” is displayed on the LCD.
For models without touch panel
Press the [▲] or [▼] in the initial state of maintenance mode to display
“MAINTENANCE 82” on the LCD, and press the [OK]. “MACHINE ERR XXXX” is
displayed on the LCD.
(2) Press the [X] or [Cancel], and the machine returns to the initial state of maintenance
mode.
To Next Page
Loading...
