Brother MFC-J2510 User Guide

Security features
5
2
NOTE
If you are using a Web browser to
configure the machine's settings for the
first time, set a password.
1 Click
Please configure the password.
2 Enter a password you want to use
(up to 32 characters).
3 Re-enter the password in the
Confirm New Password box.
4 Click Submit.
Setting and changing the
Administrator Password 2
You can configure these settings using a
Web browser. To set up the Web page, see
Before you begin to use Secure Function
Lock 2.0 on page 4. Then follow the
instructions below.
Setting the administrator password 2
The password you set in these steps is for the
administrator. This password is used to set
up users and to turn Secure Function Lock on
or off. (See Setting up restricted users
on page 5 and Turning Secure Function Lock
on/off on page 6.)
a Click Administrator.
b Click Secure Function Lock.
c Enter a four-digit number for the
password in the New Password box.
d Re-enter the password in the
Retype Password box.
e Click Submit.
Changing the administrator password2
a Click Administrator.
b Click Secure Function Lock.
c Enter a four-digit number for the new
password in the New Password box.
d Re-enter the new password in the
Retype Password box.
e Click Submit.
Setting up restricted users 2
You can set up users with restrictions and a
password. You can set up to 10 users.
You can configure these settings using a
Web browser.
To set up the Web page, see Before you
begin to use Secure Function Lock 2.0
on page 4. Then follow the instructions
below.
a Click Administrator.
b Click Secure Function Lock.
c Enter an alphanumeric Group name or
User name (up to 15 characters) in the
ID Number/Name box and then enter a
four-digit password in the PIN box.

Brother MFC-J2510 Specifications

General

Brand	Brother
Model	MFC-J2510
Category	Printer
Language	English