Brother MFC-J2510 User Guide

Chapter 7
46
2-sided copying 7
You can reduce the amount of paper used for
copies by copying on both sides of the paper.
We recommend you load single-sided
documents in the ADF for 2-sided copying.
For 2-sided documents and books, use the
scanner glass.
(Long edge flip)
Portrait
Landscape
(Short edge flip)
Portrait
Landscape
NOTE
• 2in1(ID), Poster, Book Copy and
Fit to Page are not available with
2-sided Copy.
• You can use only A4, A5 or Letter size
plain paper.
a Load your document.
b Press Copy.
c Enter the number of copies you want.
d Press Options.
e If you want to sort multiple copies, swipe
up or down, or press a or b to display
Stack/Sort.
f Press Stack/Sort.
g Press Sort.
h Swipe up or down, or press a or b to
display 2-sided Copy.
i Press 2-sided Copy.
j Swipe up or down, or press a or b to
display the 2-sided copy type you want,
and press
Portrait Long Edge Flip,
Landscape Long Edge Flip,
Portrait Short Edge Flip or
Landscape Short Edge Flip.
k Read and review the message on the
Touchscreen, and then press OK.
l Review your settings on the
Touchscreen, and then press OK.
m Press Mono Start or Colour Start.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step n.
1
2
1
1
2
1
1
2
1
2
1
2
1
1
2
1
1
2
1
2

Brother MFC-J2510 Specifications

General

Brand	Brother
Model	MFC-J2510
Category	Printer
Language	English