Brother MFC-J2510 User Guide

Making copies
43
7
Ink Save Mode 7
Ink Save Mode can help you save ink. The
machine prints the colours lighter and
emphasises the outlines of the images as
shown below:
The amount of ink saved will vary depending
on the document.
Ink Save Mode: Off
7
Ink Save Mode: On 7
(The above screens are used in ISO/IEC
24712.)
a Load your document.
b Press Copy.
c Enter the number of copies you want.
d Press Options.
e Swipe up or down, or press a or b to
display Advanced Settings.
f Press Advanced Settings.
g Swipe up or down, or press a or b to
display Ink Save Mode.
h Press Ink Save Mode.
i Read and confirm the displayed list of
settings you have chosen, and then
press OK.
j If you do not want to change any
additional settings, press Mono Start
or Colour Start.
NOTE
• Book Copy, Thin Paper Copy,
Page Layout, Watermark Copy and
Remove Background Colour are not
available with Ink Save Mode.
• Ink Save Mode may make your
printouts look different from your original
document.
Thin Paper Copy 7
If your document is a 2-sided Copy on thin
paper, choose Thin Paper Copy so the
print on the other side does not bleed
through.
a Load your document.
b Press Copy.
c Enter the number of copies you want.
d Press Options.
e Swipe up or down, or press a or b to
display Advanced Settings.
f Press Advanced Settings.
g Swipe up or down, or press a or b to
display Thin Paper Copy.
h Press Thin Paper Copy.
i Read and confirm the displayed list of
settings you have chosen, and then
press OK.

Brother MFC-J2510 Specifications

General

Brand	Brother
Model	MFC-J2510
Category	Printer
Language	English