Brother MFC-J2510 User Guide

Printing photos from a memory card or USB Flash memory drive
57
8
k Swipe up or down, or press a or b to
display 10x15cm, 13x18cm, A4, A3,
Letter or Ledger.
Press the option you want to set.
Do one of the following:
 If you chose A4 or Letter, go to
step l.
 If you chose 10x15cm or 13x18cm,
go to step m.
 If you chose A3 or Ledger, the
Touchscreen will prompt you to put
the paper in the manual feed slot.
Read the information on the
Touchscreen, and then confirm it by
pressing OK. (See Basic User’s
Guide: Loading paper in the manual
feed slot.)
Go to step m.
l Press Print Size.
Swipe up or down, or press a or b to
display the options in the following table,
and then press the option you want to
set.
m If you do not want to change additional
settings, press or OK.
Press Start to print.
Adjusting Brightness,
Contrast and Colour 8
Brightness 8
a Open the media slot cover.
b Put the memory card or USB Flash
memory drive in the correct slot.
c Press Photo.
d Swipe left or right to display
View Photos.
e Press View Photos.
Press OK.
f Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
g Press OK.
h Press Print Settings.
i Swipe up or down, or press a or b to
display Brightness.
j Press Brightness.
k Adjust the level of brightness by
pressing it on the Touchscreen.
l If you do not want to change additional
settings, press or OK.
Press Start to print.
Example: Printed position for A4 size paper
1
8x10cm
2
9x13cm
3
10x15cm
4
13x18cm
5
15x20cm
6
Max. Size

Brother MFC-J2510 Specifications

General

Brand	Brother
Model	MFC-J2510
Category	Printer
Language	English