General setup
3
1
Dial Prefix 1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example, if your telephone
system requires a 9 to dial an outside
number, use this setting to automatically
dial 9 for every fax you send.
Setting up or changing the
prefix number 1
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
d Press Initial Setup.
e Swipe up or down, or press a or b to
display Dial Prefix.
f Press Dial Prefix.
g Press On (or Off).
h Press Dial Prefix.
i Enter the prefix number (up to 5 digits)
using the keyboard on the Touchscreen.
j Press OK.
• If your telephone system requires a timed
break recall (hookflash), press ! on the
Touchscreen.
• You cannot use ! with any other numbers
or characters.
• If the pulse dialling mode is on, # and l are
not available to use.
k Press .
To Next Page
Loading...
