Brother MFC-J2510 User Guide

Making copies
39
7
Enlarging or reducing the
copied image 7
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a Load your document.
b Press Copy.
c Enter the number of copies you want.
d Press Options.
e Swipe up or down, or press a or b to
display Enlarge/Reduce.
f Press Enlarge/Reduce.
g Swipe up or down, or press a or b to
display the available options, and then
press the option you want to change.
h Do one of the following:
 If you chose Enlarge or Reduce,
press the enlargement or reduction
ratio you want to use.
 If you chose Custom(25-400%),
press to erase the displayed
percentage, or press d to move the
cursor, and then enter an
enlargement or reduction ratio from
25% to 400%.
Press OK.
 If you chose 100% or Fit to Page,
go to step i.
i Read and confirm the displayed list of
options you have chosen, and then
press OK.
j If you do not want to change additional
settings, press Mono Start or
Colour Start.
NOTE
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, 2-sided Copy,
Book Copy, Sort, Thin Paper Copy,
Watermark Copy and
Remove Background Colour are not
available with Fit to Page.
• Fit to Page does not work correctly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper-left
hand corner, with the document face down
on the scanner glass.
• Fit to Page is not available when
using the ADF.
• Fit to Page is not available for Legal
size documents.
198% 10x15cm i A4
186% 10x15cm i Letter
141% A4iA3, A5iA4
100%
97% Letter i A4
93% A4 i Letter
83% Legal i A4
69% A4 i A5
47% A4 i 10x15cm
Fit to Page
Custom(25-400%)

Brother MFC-J2510 Specifications

General

Brand	Brother
Model	MFC-J2510
Category	Printer
Language	English