30II-
Fig. 10
Fig. 11
When all key checks were completed, then displays Fig. 12 and cut the tape by printing
<<OK>>.
Fig. 12
Shifts to “9.2.4 CUT Mode” when depressed “ ” key. (Fig. 14 Display)
* PT-1250/1160, however, shifts to the “JOG Dial Check Mode”.
Enters into the JOG Dial Check Mode after printed that all key had been completed without
displaying OK. The cursor moves toward direction of the rotation.
After confirmation was made, shifts to “9.2.4 CUT Mode” when depressed “ ” key. (Fig.
13 Display)
Fig. 13
9.2.4. Cut Mode “4” Key
Here, check the cutter function.
Display of Fig. 12 is indicated when depressed “ ” key or depressed “4” key in the display
of Fig. 13 (except while in the Key Inspection Mode).
Fig. 14
Fig. 15 is displayed when depressed “ ” key to feed the tape. “1“ is displayed after
completed the feed.
Fig. 15
Fig. 16 is displayed when depressed “ ” key to feed the tape. “2” is displayed after
completed the feed.
Fig. 16
A
S X
O K
J O G ?
C U T
F E E D
1
F E E D
2
To Next Page
Loading...
Need help?
General
