Setting Up the P-touch
7
1
Inserting a Tape Cassette 1
The TZe tape, FLe label, and HSe tube cassettes can be used in your P-touch.
If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the
cassette.
a Check that the end of the tape is not bent and that it passes through the tape guide. If it does not, pass
it through the tape guide as shown in the illustration.
1 End of tape
2 Tape guides (The actual shape may be different depending on the tape width.)
b Press the cover open button to open the top cover.
c Insert the tape cassette into the tape cassette compartment with the end of the tape facing the P-touch
tape exit slot, then push down evenly until the tape cassette is installed correctly.
1 Tape exit slot
1
2
2
1
To Next Page
Loading...
Need help?
General
