Changing the P-touch Settings
21
3
Menu Bar 3
1 Apply Settings to the Printer
Applies the settings to the printer.
Performs the same operation as when [Apply] is clicked.
2 Save Settings in Command File
Saves the specified settings in a command file.
Performs the same operation as when [Save in Command File] is selected from the [Apply] drop-down
list.
3 Import
Imports the exported file.
4 Export
Saves the current settings in a file.
5 Save Print Log in File
Saves the print log in a file in the CSV format.
6 Print Unit Settings
Prints a report containing firmware version and device setting information.
You can also print this report using the (Feed and Cut) button for more than 10 seconds. See
Confirming the P-touch Settings on page 28 for more information.
When you print this report, use 24 mm or 36 mm tape.
5
6
7
10
11
13
8
9
12
1
2
3
4
To Next Page
Loading...
