Changing the P-touch Settings
19
3
Device Settings 3
With [Device Settings] in the “Printer Setting Tool”, printer settings can be specified or changed when
connecting the printer and computer with a USB cable. Not only can you change the device settings for one
printer, but you can also apply the same settings to multiple printers.
When printing from a computer application, various printing settings can be specified from the printer driver;
however, by using [Device Settings] in the “Printer Setting Tool”, more advanced settings can be specified.
When [Device Settings] is opened, the printer's current settings are retrieved and displayed. If the current
settings could not be retrieved, the previous settings are displayed. If the current settings could not be
retrieved and previous settings have not been specified, this tool’s factory settings are displayed.
Settings Dialog Box 3
1 Menu Bar
Select a command contained in each menu from the list.
2Printer
Specifies the printer whose device settings are to be configured.
If only one printer is connected, it is unnecessary to make a selection since only that printer will appear.
3 Settings Tabs
Contains settings that may be specified or changed.
If appears in the tab, the settings in that tab cannot be specified or changed. In addition, the settings
in the tab will not be applied to the printer even if [Apply] is clicked. The settings in the tab will also not be
saved or exported when the [Save in Command File] or [Export] command is executed.
4
7
8
1
2
5
3
6
To Next Page
Loading...
Need help?
General
