How to Use Cable Label Tool
41
6
Cable Flag 6
Labels of this type can be wrapped around a cable or wire, and both ends of the label stick together to form
a flag.
The text on flag labels is printed on both ends of the label, leaving a blank space in the middle that wraps
around the cable.
• The flag length (1) should be at least 15 mm.
• Orientation
• We recommend using Flexible ID Tape for the "Cable Flag" labels.
• Labels made with Flexible ID Tape are not designed for use as electrical insulation.
Horizontal Vertical
1 Flag length
2 Cable circumference
1
121
121
To Next Page
Loading...
