Changing the P-touch Settings
23
3
Basic Tab 3
1Auto Power On
Specifies whether or not the printer turns on automatically when the power supply cord is plugged into an
electrical socket.
Available settings: [Disable], [Enable]
2 Auto Power Off (AC/DC)
Specifies the period of time that passes before the printer turns off automatically when connected to an
electrical socket.
Available settings: [None], 10/20/30/40/50 Minutes, 1/2/4/8/12 hours
3 Auto Power Off (Li-ion)
Specifies the amount of time that passes before the printer turns off automatically when powered by the
rechargeable Li-ion battery.
Available settings: [None], 10/20/30/40/50 Minutes, 1 hour
4 Contents
Specifies the printer information that will be printed.
Available settings: [All], [Usage Log], [Printer Settings], [Printer Transfer Data]
5 Save Printer Print Log
Select whether or not to save the printer's print log. If [Disable] is applied to the printer, [Maintenance] -
[Save Print Log in File] doesn't work.
Available settings: [Enable], [Disable]
1
2
3
4
5
To Next Page
Loading...
