Changing the P-touch Settings
22
3
7 Factory Reset
Resets all printer settings to factory settings.
8 Delete Print Log
Deletes the print log stored in the printer.
9 Feed Tube
Adjusts the tube position by feeding a fixed amount of tube. The tube will be fed when [Forward] or
[Backward] is clicked.
10 Reset Tube Cutter Counter
Resets the counter for the tube cutter.
11 Reset Tube Printing Meter
Resets the total length for the printed tubes.
12 Option Settings
If the [Do not display an error message if the current settings cannot be retrieved at startup] check
box is selected, a message will not be displayed next time.
13 About
Displays the version information.
To Next Page
Loading...
