62
10
10
You can reset the internal memory of your P-touch to clear all saved label files, or if the P-touch is not
operating correctly.
Resetting All Settings to the Factory Settings Using the
P-touch Buttons 10
All text, format settings, option settings and stored label files are cleared when you reset the P-touch
(including language and unit settings).
To reset the P-touch, perform the following procedure.
a Turn the P-touch off.
b Press and hold the (Power) button and the (Feed and Cut) button for about three seconds until the
(Power) indicator lights in orange and the (Label) indicator blinks in green.
c While holding the (Power) button, press the (Feed and Cut) button as follows:
Press two times to reset the customised settings.(Some settings, such as Auto Power On, Print
Information Report, Full Cut Margin Adjustment, and Half Cut Margin Adjustment in Device Settings,
are not reset.)
Press six times to reset the P-touch settings to the factory settings.
d Release the (Power) button.
Resetting Data Using the Printer Setting Tool 10
You can use the Printer Setting Tool from a computer to perform the following operations for the P-touch:
Resetting the tube cutter counter
Resetting the tube print length
For more information, see Changing the P-touch Settings on page 16.
Resetting the P-touch 10
To Next Page
Loading...
