Setting Up the P-touch
9
1
Feeding Tape 1
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette.
• Do not pull the label when the P-touch is ejecting it from the tape exit slot. Doing so will cause the
ink ribbon to be discharged with the tape. The tape may no longer be functional after the ink ribbon
discharges.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.
Feed and Cut 1
The Feed and Cut function feeds approximately 22.3 mm of blank tape, and then cuts the tape.
Press the (Feed and Cut) button.
To Next Page
Loading...
