Brother PT-E800T - How to Update P-Touch Software; Updating Cable Label Tool and P-Touch Editor

56
9
9
The software can be upgraded to the latest available version using the P-touch Update Software.
Note
• The actual software and the contents of this manual may differ.
• Do not turn off the power when transferring data or updating firmware.
Updating Cable Label Tool and P-touch Editor 9
Important
The printer driver must be installed before updating Cable Label Tool and P-touch Editor.
a Start the P-touch Update Software.
 For Windows 7:
Double-click the [P-touch Update Software] icon.
Note
The following method can also be used to start P-touch Update Software:
Click the Start button, and then select [All Programs] - [Brother P-touch] - [P-touch Update Software].
 For Windows 8.1:
Click [P-touch Update Software] on the [Apps] screen or double-click [P-touch Update Software]
on the desktop.
 For Windows 10:
From the Start button, select [All apps] and click [Brother P-touch] - [P-touch Update Software],
or double-click [P-touch Update Software] on the desktop.
How to Update P-touch Software 9