Troubleshooting
77
14
Small characters printed on the label
are faint.
High quality printing can be used if TZe laminated tape with black ink is
installed. Use the printer driver to select the high quality mode when printing
the labels.
You cannot use this function for TZe-FX**1 tape.
The high resolution or high speed
printing setting was specified, but an
error occurred and printing could not
be completed.
As conditions for high resolution or high speed printing, the AC adapter must
be connected, and TZe laminated tape with black ink must be installed.
You cannot use this function for TZe-FX**1 tape.
To clear the error, cancel the print job, and then connect the AC adapter or
cancel high resolution or high speed printing.
Printed barcodes cannot be read. Print labels so that barcodes are aligned with the print head as shown
below:
1 Print head
2 Barcode
3 Printing orientation
Try using another scanner.
We recommend printing the barcodes with [Standard] selected from the
[Quality] options.
• Windows 7:
To display the [Quality] options, open the printer properties by clicking
the Start button - [Devices and Printers], right
-clicking the printer you
want to set up, and then clicking [Printing Preferences].
• Windows 8.1:
To display the [Quality] options, open the printer properties by clicking
[Control Panel] in the [Apps] screen - [Hardware and Sound] -
[Devices and Printers], right
-clicking the printer you want to set up, and
then clicking [Printing Preferences].
• Windows 10:
To display the [Quality] options, open the printer properties by clicking
the Start button - [Settings] - [Devices] - [Devices and Printers],
right
-clicking the printer you want to set up, and then clicking [Printing
Preferences].
FLe labels cannot be positioned
correctly.
If the FLe sensor is dirty, FLe labels cannot be positioned correctly. Wipe the
FLe sensor using a cotton swab moistened with alcohol to clean the sensor.
See Cleaning the FLe Sensor on page 65.
Problem Solution
1
2
3
To Next Page
Loading...
